What is Porsche ep 7110 ?
It is a customized model for Porsche cars, which has the task of helping the engine to perform better by reducing emissions and reducing noise and temperature.
Previously, the efficiency of exhausts was only summarized as a part in the car for the exit of smoke caused by combustion in internal combustion engines.
EP 7110 is an excellent option for use in Porsche cars due to its beautiful chrome finish and heat shield.
There are different types of exhausts. Single outlet exhausts are usually found in cars with low displacement engines.
The smoke in this exhaust system comes out directly from the engine through a pipe. The second type of dual exhausts is the opposite.
Porsche EP 7100 exhaust is one of this exhaust category. This type of exhaust was used for the first time in American cars at the end of the last century. The positive features of these exhausts are much more than single exhausts.
At the beginning of the invention of this type of exhaust, automobile factories were not able to use it in small and medium cars. Then, by designing smaller tanks, American engineers have made it possible to use this method of exhausts in all cars.
What parts does the exhaust (Porsche ep 7110) include?
In normal mode, only the exhaust output parts can be seen. If you check the car from below better. Exhaust components include interconnected parts that connect the engine to the end of the car.
- At the beginning of the exhaust path, the smoke from combustion is received through the exhaust manifold.
2. The connecting pipes of the exhaust smoke route from a higher height (at the same level as the engine) reach the lower part of the car chassis.
3. Then the gas enters the catalyst in the next step. This source is responsible for cleaning the smoke from the engine
4. Then, the other connecting pipes transfer the exhaust smoke from the previous stage to the farthest part of the car
5. The exhaust source is responsible for muting the sound of the engine’s combustion process.
The exhaust outlet is the last part of the exhaust that transfers the smoke transferred to the last part of the car to the open air
Porsche ep 7110 is suitable for which Model ?
Exhaust outlet ep 7110 can be used for Porsche 911 (regular and convertible models), Porsche 922 (and Porsche 922.2), Carrera 1998-1993 and Porsche 993.
What is the price of EP 7110?
You can find different prices for buying a pair of ep 7110 on different sites. In general, the original price of this part is about $650 to $700. If you search and try a little, you can get second-hand copies from second-hand sites for $300. However, make sure that there are no scratches on the exhaust.
How to install porsche ep 7110
- First, raise the car as much as possible using the lifts so that you can have easier and better access for work.
2. Using a suitable tool, slowly open the screw under the previous exhaust. Rusty and worn screws that have been destroyed due to long-term contact with humid air can be destroyed quickly due to pressure.
3. Place the new exhaust pieces in place and make sure they are properly adjusted by checking the various angles before closing.
4. After making sure that the adjustment is accurate, tighten the connection screws
5. Make sure the installation is done correctly by turning on the car
