BMW G80 Front Lip

Even if you have a beautiful BMW car, the idea of making it more special than usual motivates people. Some cars, regardless of the price and beautiful design, don’t stop to make it more beautiful. But BMW, as one of the best car manufacturers, always makes additional positions for car owners to further improve the beauty of the car.

Lips, especially the Front Lip for BMW G80, are designed to give a more sporty effect and a rougher appearance in the front of the car, while having a color difference, which is an excellent choice to upgrade the appearance of the car. You don’t have to do much to get it and make your car the most beautiful. It can be installed with a few simple tricks, which we will explain below.

What is difference between Diffuse and Lip ?

Diffuse and Lip both parts include parts that are connected to the front and rear of the car. Although it seems that they are similar in terms of appearance and installation method, but they are built and designed for separate purposes in the interior and function.

Some of the differences between diffuse and lip include the following:

1. The lip is usually a thin piece with a small thickness, but the diffuser is often larger in size
2. Lip is a lightweight piece with a simple structure, but the diffuser has a more complex structure.
3. Lip performance is to improve the appearance and increase the beauty of the car. But the diffuser is used to increase the performance and stability of the car and improve the effective force in the car (Downforce) through better control and improvement of air flow.
4. Diffuse installation places are in the places where it is entered with the help of the suspension system and dynamics of the car. This place can be more in the back of the car. Unlike them, the lip is installed at the outermost point around the car.

How to install BMW G80 Front Lip ?

1. To install the BMW G80 Front Lip, we must first open the parts related to the bumper that must be replaced. Open the air resistance in the front part. These parts are connected to the body with plastic clips and screws.

2. Keep the screws in a safe place to prevent them from getting lost. Many of the purchased Lips do not have installation screws.

3. On the old parts, there are primary connection clamps that are used for the primary adjustment of the Lips. Remove the plastic clips from the old Parts.

4. Place the connection clips separated from the old part in the same place in the new Lips.

5. Tighten the edges of the lips in place with the help of clamps.

6. Control both sides well so that they are in place and in their ideal position before closing.

7. Finally, after making sure of everything, tighten the final screws.

What is the BMW G80 Front Lip made of?

The concept of beauty in sports cars is related to the weight of the car. Additional parts for the beauty of the car cannot and should not increase the weight of the car.
Adding the weight of the car to a large extent can reduce the performance of the car and by increasing the consumption of the car and reducing the acceleration and speed of the car in the long run, it can cause serious damage to the car engine.

1) The first category of these parts are made of plastic. Although these plastic parts are light in weight and low in price, they are less resistant to weather changes and sunlight and break easily.

2) The second category is made of light and cheap metals such as aluminum. Aluminum allows different shapes to be easily formed by the machine and while having a low weight, it also has a high relative resistance.

3) The third category of parts are made using carbon fibers. Carbon fibers, which are considered an expensive material, are made of fibers like carbon, for the production of these products, a lot of energy is needed, which is why they are not suitable for the environment, and they are always criticized by environmentalists, and this high energy consumption for production That is one of the main reasons for their high price.

Black Rims on White Car

BMW G80 Front Lip Price :

Lip parts have different prices based on the type, material, size and manufacturing quality. In full carbon models, it is not difficult to expect a price of up to 2500 dollars for a large piece. This price is expected for original parts. In various models, depending on the type of carbon fiber, you can find something around 200 to 300 dollars.

The difference in price is that in expensive models, the ingredients show more resistance to ultraviolet rays and temperature and can be installed without the need for the optional carbon package (SA71C).